American Standard Bathroom Aids T02850X User Manual

Installation  
Instructions  
DAZZLE  
T028.50X  
BATH AND SHOWER TRIM KITS  
ff  
O
ot  
H
Thank you for selecting American-Standard...  
the benchmark of fine quality for over 100 years.  
To ensure that your installation proceeds smoothly--  
please read these instructions carefully before  
you begin.  
Certified to comply with ANSI A112.18.1  
M968834 REV 1.3  
Required Tools  
Flat Blade Screwdriver  
Phillips Screwdriver  
Channel Locks  
Teflon Tape  
Plumbers' Putty or Caulking  
ROUGHING-IN DIMENSIONS  
To assure proper positioning in relation to wall, note  
roughing-in dimensions.  
INLETS  
1/2" NOM.  
COPPER  
SWEAT  
INLETS  
4-1/16"  
SHR. 1/2" NOM.  
COPPER SWEAT  
SWEAT  
INLETS  
FINISHED WALL  
1/2" NPT  
2"  
4-1/16"  
TUB 1/2" NOM.  
COPPER SWEAT  
5-1/8" REF.  
SWEAT  
INLETS (STOPS)  
1-5/8"  
to  
5-7/8"  
3-1/4"  
SHR. 1/2" NOM.  
COPPER SWEAT  
OPTIONAL TO FINISHED  
FLOOR USUALLY  
BETWEEN 65'' AND 80''  
4-1/16"  
7-7/8" REF.  
TUB 1/2" NOM.  
COPPER SWEAT  
INLETS  
1/2" NOM.  
COPPER  
SWEAT  
INLETS 1/2" NPT  
3-3/8"  
74" FOR HEAD  
CLEARANCE  
7-1/8"  
3-3/8"  
18" OPTIONAL  
OUTLETS  
1/2" NPT  
THREADED INLETS  
1-1/2"  
REF.  
OUTLETS  
1/2" NPT  
5-7/8"  
INLETS  
1/2" NPT  
4"  
1/2" NPT  
5" REF.  
TOP OF TUB RIM  
3-3/8"  
BOTTOM OF TUB  
THREADED INLETS (STOPS)  
 
TO GAIN ACCESS TO VALVE FOR SERVICING  
4
Pull INDEX CAP, unscrew HANDLE SCREW and pull HANDLE off valve stem.  
Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON.  
Remove COVER by pulling straight out.  
Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve.  
VALVE LEAKS WHEN SHUT OFF  
Remove CARTRIDGE (1) by removing CARTRIDGE SCREWS (2). Remove three SCREWS (3) from FIXATION RING (4) and  
pull out PRESSURE BALANCING (5) unit.  
Clean SEALS (9) on base of CARTRIDGE (1). Check base of PRESSURE BALANCING UNIT (5) and clean O-RINGS (6). Remove  
CAPS (7) and check O-RINGS on inside of CAPS (7). Clean inside sealing surfaces of VALVE BODY (8).  
Re-assemble PRESSURE BALANCING UNIT (5) and CARTRIDGE (1). Tighten all screws.  
Turn on water supply and see above for installing TRIM and HANDLE.  
UNABLE TO MAINTAIN CONSTANT TEMPERATURE  
Remove PRESSURE BALANCE UNIT (5).  
Remove CAPS (7) and clean valve thoroughly.  
Examine balancing unit and check condition of O-ring on end of piston. Piston should move back and forth. Order Repair  
Part M952100-0070A if balancing unit is defective.  
Replace CAPS (7) and install PRESSURE BALANCE UNIT (5). Make sure inlets line up with two holes in bottom of casting.  
Top flange should butt-up against top of casting.  
BACK TO BACK INSTALLATION  
Remove PRESSURE BALANCE UNIT (5). Rotate PRESSURE BALANCE UNIT (5) 180˚ so that the inlets face up and the  
large outlet port faces down.  
Push PRESSURE BALANCE UNIT (5) in casting make sure inlets line up with holes in bottom of casting. Top flange should  
butt up against top of casting.  
Reassemble FIXATION RING (4) and CARTRIDGE (1).  
6
ROTATE 180˚  
4
LARGE OUTLET  
1
5
7
8
INLETS  
5
3
2
9
BACK TO BACK INSTALLATION  
CARE INSTRUCTIONS:  
5
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.  
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A  
CLOTH WITH A COARSE SURFACE.  
M968834 REV 1.3  
 
DAZZLE  
BATH AND SHOWER TRIM KITS  
MODEL NUMBER  
T028.50X  
M962286-YYY0A  
SHOWER ARM AND ESCUTCHEON  
WITH SEALS  
Replace the "YYY" with  
appropriate finish code  
M953564-YYY0A  
SHOWER HEAD  
CHROME  
SATIN  
002  
295  
M907051-YYY0A  
CARTRIDGE CAP  
078016-YYY0A  
ESCUTCHEON SCREWS  
M962293-YYY0A  
ESCUTCHEON KIT  
WITH SCREWS  
Off  
M916529-YYY0A  
LEVER HANDLE  
A918657-0070A  
HANDLE SCREW  
ot  
H
M907024-YYY2A  
INDEX BUTTON (ARROW)  
M909732-YYY0A  
SPOUT ESCUTCHEON  
M950226-YYY0A  
DIVERTER SPOUT  
HOT LINE FOR HELP  
For toll-free information and answers to your questions, call:  
1-800 442-1902  
Weekdays 8:00 a.m. to 6:00 p.m. EST  
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)  
Weekdays 8:00 a.m. to 7:00 p.m. EST  
IN MEXICO 01-800-839-12-00  
Product names listed herein are trademarks of American Standard Inc.  
M968834 REV 1.3  
©
AS America, Inc. 2008  
 

Acer Projector 1100E User Manual
Acer Projector PD116 User Manual
Acoustic Energy Speaker System Linear Centre User Manual
AEG Dishwasher F89078VI M User Manual
Air King Fan 2EJR6G User Manual
Alamo Lawn Mower 02974374P User Manual
Amana Range ZRRSC8050 User Manual
AMD Computer Hardware 790GX User Manual
American DJ DJ Equipment Mighty Scan User Manual
BC Speakers Speaker 10PLB76 User Manual